Free download Mazda IDS 109 for VCM2, Vxdiag Nano

Mazda IDS 109 Mega link:

Unknown risk! Good luck!

For security, go to tested versions Mazda IDS 108

tested no issues with VXDIAG VCX NANO:

Mazda IDS V96 working for VCM2 clone:

Both tested 100% by real prosAnd confirmed to work perfect with VCM2 clone Look at the video

How to keep GM GDS2 – NEVER expires

Found a way to keep GM GDS2 for longer than 30 days after downloading it.

So I found a way to keep GDS2 indefinitely…or as long as you own your computer. First of all I’m not sure if this works for the 3 day subscription but I don’t see why not. So after you download GDS2 in Tis2web, to keep the license going there is a program(free) called ‘runasdate’, there is a 64 bit version and a 32 bit version. Use the 32 bit version. If you need help setting it up I can screen shot how I set mine up, although it’s incredibly easy. Enjoy and thanks and rep would be appreciated if you found this useful

P.S. Don’t let this leak to GM so they don’t close this loophole. Also, ignore the 30 days countdown in GDS2 once you set it up, it’ll count all the way down to 0 days but still work beyond that!

Easy way from obdexpress.co.uk:

You can change the time of your GDS2 installation and it will continue to work

Look here: GDS2 works perfect

Source: http://www.obdexpress.co.uk/wholesale/gm-mdi-gds2-opel-vauxhall-buick-chevrolet.html

How to keep GM GDS2 – NEVER expires

How to install TIS2000 software for GM pre-2008

A lot of info I found over at SaabCentral but it is just a giant thread to read through although a lot of the info is on the first page. And a lot doesn’t apply since it’s geared towards Saab (even the 9-7x doesn’t apply, it’s under GM).

So you have a Tech2 scan tool but a lot of the things you would like to do is locked out because you don’t have access to the computer software to allow you to do it. Things like updating PCM’s and modules and anything security related are locked out. If you bought one of the Tech2 clone, it probably came with a CD with the Tis2000 software. If you install it and try to use it, it says that it can’t find the USB security dongle or something like that. That’s because only dealers have those or a clone of one wasn’t included.

First of all, this is old software. It was discontinued in 2008 by GM which means that it works only for vehicles up to model year 2007. It will have PCM and module updates included. For example, I was able to update all of the modules and PCM in my 2006 9-7x even though it had only been a year or two since production and issue of this software. It will also allow you to reprogram a module that you are replacing.

The Tech2 communicates with the computer using a serial port on the computer running Windows XP SP3. This can be a problem if you only have newer computers. Best and easiest scenario is to use an older laptop computer that has a serial port running windows XP. In my setup, I used an old IBM T40 laptop, which is fairly decent processor wise, installed a fresh copy of Windows XP SP3 and used a docking station with it that has a serial port. Laptops that have actual serial ports built in are probably so old that they are too slow or have age and reliability issues. Another solution would be to get a USB to serial port adapter and specify the proper COM port number during the install of Tis2000.

Another possible solution would be to use a virtual environment on a host computer. VMWare is free to use and it has been done from what I read but could be a fairly involved process because of the serial port issue, especially when using a USB to serial adapter. The challenge of communicating from the virtual environment through the real computer’s hardware ports can make it difficult but can be done. I’m not going to discuss this type of installation but the basic software installation and use will be the same. If anyone gets a virtual install working, please post it up.

In some detail, this is what I did. Keep in mind that you should have some computer knowledge and know how to install Windows.

1. Installed a fresh copy of Windows XP SP3. I didn’t bother with updating anything else as far as security updates to Windows or install a virus scan because this computer will never be connected to the Internet or used for anything else.

2. Installed ALL the required drivers until there were no more yellow check marks in Device Manager. I failed to do this at first and caused a lot of headaches later, including a BSOD during software installation.

3. If you’re using a USB to serial adapter, plug it in now and set it up. Go into Device Manager and make note of the COM port used by the adapter.

3. Install the Tis2000 software from the CD included with the Tech2. During the install, it will ask you to specify the COM port. If you have a serial port on the computer, it’s probably COM 1 or use the one from the USB adapter.

4. Before you can use Tis2000 with your Tech2, you have to make it “think” that there is a dongle connected that authorizes it. You can download the crack below. Follow the read me file for instructions on how to use it.

That’s it. More threads will come explaining how to do stuff with it but this will get you going.

And if you need them:

TIS2000 Software with Dongle (this is what i’m using)

When you click on the links, they will bring you to 4Shared, click on “Free Download”, a little window will pop up asking to log in using either a social media account or sign up for an account. Sign up with an email and password and then create a name. After that, you will be brought back to the download page and the 60 second timer will count down, after which the download will start.

Warning: In Tis2000, whatever you do, DO NOT USE THE “SOFTWARE DOWNLOAD” BUTTON! This will retrograde the card in your Tech2 to an old version from 2008.

If you want a tested version to use with relief:

SRC:

(Solved) Elsawin Error: ELSAWINDB could not be installed

Here are customer solutions of Elsawin install failure with error message “The SQL Server instace ELSAWINDB could not be installed” with different error codes.

The error message will be displayed like this and the like

Elsawin Error

Elsawin ErrorCode: -2068052713

if has problem “ELSAWINDB could not be installed.ErrorCode: -2068052713”

Go to:

Control Panel

Program and Features

On the left Turn Windows Features On or Off

Make sure .NET Framework 3.5 (includes .NET 2.0 and 3.0) box is checked (Check every box inside it).

It should work now

Elsawin ErrorCode: -2068054016

if has problem “ELSAWINDB could not be installed.ErrorCode: -2068054016”

Location: %ProgramFiles%\Microsoft SQL Server\100\Setup Bootstrap\Log\

Purpose: This log is the clean and user friendly log file that contains the basic information about the problem. This file shows which SQL server components were detected, the operating system environment, the command-line parameters that were specified, the values that were specified, and the overall status of each MSI and MSP file that was executed.

Troubleshooting: To find errors in this file, search for “error” or “failed” keywords. For more information about details of the failure, open the file that is listed in the line starting with “Log with failure”.

My error:

Another version of Microsoft Visual Studio 2008 has been detected on this system that must be updated to SP1. Please update all Visual Studio 2008 installations to SP1 level, by visiting Microsoft Update.

Elsawin Error Code: -2068025713

ElsaWin is the official Windows Software for servicing Audi and VW cars globally. Due to Windows 8 and 10, 32-bit and 64-bit versions, sometimes we don’t get them to install correctly or having problems installing them.

For 64-bit version of Windows 8 and 10 (most of newer computer or laptops), the only ElsaWin that support are versions 4 or newer. The current one now is 5.2 which includes some of the 2016 models.

ElsaWin requires .NET Framework 2.0, 3.0 and 3.5 to work. Windows 8 & 10 use .NET Framework 4.x but they also have the options can be turn on in “Turn Windows features on or off” in Control Panel/Programs and Features. If you don’t have these enabled correctly, we should get Error Code: -2068025713 ELSAWINDB could not be installed.

Elsawin Version 4.0 and 4.1 update should not have any problems installing first regardless, but most of the problems exist in the version 5.0 update when the SQL 2008 is installed. Windows 10 will give warning that the SQL 2008 may not be compatible, but it won’t stop the installation if everything is update correctly.

*** Make sure to run the setup.exe with Administrator permission ***

Source:

http://blog.obdexpress.co.uk/2017/12/28/elsawindb-could-not-be-installed/

How to solve DAS/Xentry Sim Error

Here has some FAQ about DAS/Xentry software:

Q: I have problem with Xentry Sim 11.2011, when it launch Sim DAS -> No language defined!
How to fix it ?
A: Place DAS SIM and DAS Shortcuts on desktop:
DAS shortcut target as: F:\Programme\DAS\bin\DAS32R2.exe -len
And for DAS SIM Target as: F:\Programme\DAS\bin\simdas.exe -*CALsimu -*ctxtsim.sli -*nolog -*len

Q: do you have DAS32R2.exe for 11.2011. I launch ORG DAS32R2.exe say Star DAS via Xentry
A: you can use xentry sim
no worries
starting 05 2011 das execute under xentry
if u insist to use das standalone, then use 01 2011 or 2010 version as Patrian said.
why you should looking for difficult ways
there are some reason why miss daimler developed xentry and merge Das inside it.
best wishes

Q: I want to use SimDAS
Of course I launch Xentry Sim first but when I choose C Class (203). SimDas is executed but ” No language defined! ” and not run
A: It seems that the installation not going perfect.
you must passed all the installation ways to finish button.
And the nature junction folder “Üserdata”from C to F will be created itself
when you have a good installations steps.
no need to use any junction method. :tdown:
the folder Userdata in F:\ will be seen as a book folder, a little different than C:\.
take a notice on that as Patrian said above.
anyway wish u a good booobieeess
there you go … M8 …

Source:

http://blog.obdexpress.co.uk/2017/10/17/dasxentry-sim-error-no-language-defined-solved/

Original Autel Scanner Software Update Instructions

Here is the Autel software update Instruction munual ,suitable for MaxiDiag Elite MD802,MD701,MD704, MaxiCheck ,MaxiTPMS TS501, TS601, AL609, AutoLink AL619, MaxiService EBS301,OLS301, VAG505 and MOT PRO.

Register the Tool:

Please go to our website www.autel.com to register an Autel ID.

Then sign in our website with your Autel ID and password to register your tool: http://pro.auteltech.com/

Autel software update Instruction munual(1

Note: when registering the tool on our website, please make sure that the serial number and register password that you input are correct.

On the tool itself, you can press on Setup->About to double check the serial number and register password. If you only have the S/N, please contact our technical support to check out the register password.

Update via Computer:

1. Log in our website with your Autel ID and password, and then download the latest PC Suite for your tool from your account. http://pro.auteltech.com/

Autel software update Instruction munual(2

2. Then please install the PC Suite on a Windows computer that can get Internet access.

3. Insert the SD card to USB port of the computer via a SD card reader, run the PC Suit, then input your Autel ID and password to log in our system. If you forget your password unintentionally, you may always click the [Forget Password?] to link to our website and reset your password.

Autel software update Instruction munual(3

4. Then wait for the Update window to display.

You can use the pull-down menu on the right corner to select the correct SD card if two or more SD cards have been connected to the PC. And you can click on the Install button to download the software updates.

To ensure the good performance of the scan tool, it is recommended to download and install all the software updates.

Autel software update Instruction munual(4

5. After downloading all the software, please insert the SD card back to the Autel scan tool; then you can enjoy the new software.

How to setup Star Finder Mercedes on Windows 64bit

It’s a customer solution of Star Finder Mercedes Benz setup on Windows Vista or Win7, 64bit.

Free download ETMviewer.zip
https://mega.nz/#!bYR1ELiA!epv4790nIPaNSA6zgOZoVox3RIgfZ2UL4hmqFYVFwlQ

STAR Service Manual Libraries on CD and DVD

Workaround for Compatibility Issues with 64-Bit Version of Windows Vista and Windows 7

GETTING YOUR CD or DVD to WORK with 64-Bit
This also applies to CDs/DVDs that are not listed as being compatible with Windows Vista and Windows 7.

Step 1
The first step is to prevent the WHIP! application from starting. This is possible by adding an “Autodesk WHIP!” key to the Windows Registry. This will prevent the WHIP! application from installing, which prevents program start when canceling.

Continue to Step 2 to enable access to wiring diagrams.

Step 2
Go to the Autodesk web site and download Design Review software. Click to Link to Site.http://usa.autodesk.com/adsk/servlet/pc/index?id=12423405&siteID=123112
Installation instructions:

Step 3
Because of the now missing Autodesk WHIP! Plug-in, the wring diagrams on CD/DVD are inaccessible. The workaround for this is a separate “ETM Viewer” application that uses Autodesk Design Review and updated wiring diagrams.

Get the required files:

– Unpack the ETMviewer/zip and webetm***.zip files.

– Move the “webetm”folder and “start.html” file into the empty “ETMviewer/webetm” folder.

Source:http://blog.obdexpress.co.uk/2017/04/03/how-to-setup-star-finder-mercedes-on-windows-64bit/